Skip links

Universal Coyote Swap Engine Mount Kit

Universal Coyote Swap Engine Mount Kit



  • Designed to install a Coyote engine in your project
  • Requires cutting and welding to fit your project
  • All kits include mounting hardware
  • Motor mount kits include motor mount bushings
  • Shipped raw steel. Requires paint or powder coating

Currently out of stock but can be ordered. Next batch will ship by May 1st.

SKU: FFG-UNIV-MMTX Availability: Available on backorder


This kit is designed to fit the 2011-2019 Coyote motor and also includes the cross-member for the 6R80/10R80 automatic transmissions. The kit comes with all the hardware needed to install the motor and the transmission cross-member.

The frame perches will need to be trimmed and welded into your vehicle. We also recommend boxing your frame in for additional strength. The transmission cross member frame mounts are spot welded to allow for adjustment to fit your project and require finish welding.

  • Update: New wider crossmember to fit newer models. The 80’s & 90’s truck have wider frames and this new crossmember has been extended to fit more vehicles. The transmission crossmember mounting holes are 35-3/4″ on center. You can trim the width to fit your project as needed.

The weld-in motor mount frame perches are 7-1/4” from base to center of the bolt hole.

The mounts are shipped in raw steel and will require paint or powder coat before the final installation.

Additional information

Weight25 lbs
Swap Options

Motor Mount & Crossmember Kit, Motor Mounts Only, Crossmember Kit Only